Custom PCBA Production from Gerber & BOM Files
We just focus to provide electronic manufacturing service for PCBA board and electronic products
Contact us-
OEM order for PCBA
To proceed, we require the customer to submit a Gerber file (or the native PCB file) and a complete BOM. We’ll use the Gerber file for PCB fabrication, procure the necessary parts from the BOM, and handle the full SMT assembly in-house.
-
OEM order for electronic products
For end-to-end manufacturing, we require the customer to send the 3D housing design file, PCB Gerber files, and a detailed BOM. Based on these, we will build the case mold from the 3D file, fabricate the printed circuit board from the Gerber data, order all necessary parts listed in the BOM, assemble the PCB using our SMT capabilities, and conduct final product assembly within our factory.
-
ODM order for PCBA board
To make changes to an existing PCB, please send us the original .pcb design file. Our hardware engineers can then tailor the PCB’s geometry and interface placements per your specifications. For new PCBA development, you’ll need to provide either the schematic file or a thorough outline of functional needs and operational logic—allowing us to execute the entire design process for you.
-
ODM order for electronic products
Some customers wish to modify the product’s overall look and structural design. In such cases, we require complete original data and design files to carry out a full redesign—including industrial design (ID) updates, structural adjustments, PCB dimension changes, and repositioning of related interfaces.
For entirely new products based on fresh concepts, customers must provide detailed functional specifications, clear logical architecture, and well-defined ID/appearance expectations. Please note: vague or incomplete ideas alone are insufficient for accurate design execution.
OEM for PCBA board
OEM includes PCB fabrication, components sources, and PCB assembly. The PCB board is made based on the gerber file and PCB parameter requirements provided by the customer. Material procurement is based on the provided BOM list, and surface mount production is determined based on the provided gerber file and BOM list through engineer analysis to meet production requirements.
ODM for PCBA board
ODM PCBA adds design work on the basis of OEM, which can usually be designed from the schematic provided by the customer, or modified according to the customer's requirements based on the samples and documents provided by the customer.
OEM for electronic products
OEM electronic products are based on customized processing requirements for the structure and shell of PCBA boards. In addition to the provided PCB files, customers also need to provide 3D files of the shell and detailed requirements for the shell, such as surface treatment, silk screen files and requirements, shell material, and so on.
ODM for electronic products
ODM electronic products are based on OEM electronic products, with the addition of PCB board design and shell design work. They belong to the design and development of complete product solutions, which are difficult, time-consuming, and costly. Customers are required to provide a complete electronic hardware design concept, detailed software functional requirements, and detailed requirements for the shell product.
PCB information:
FR4 material,4 layer,1.0mm thickness,1oz copper,HASL lead free(Optional ENIG),blue solder mask and white silkscreen,
PCBA information:
Double sided mounting,
BGA, QFP, and SOP packaged chips,
0201,0402,0603,0805,1206 packaged resistor and capacitor
Lead free processing technology
PCB and PCBA related process parameter table
The following table contains some required parameters for PCB and PCBA production. When customers send PCB files, they need to inform us of the relevant PCB parameters. The table lists the basic parameter requirements, and each requirement corresponds to a different PCB cost.
PCB |
Layer |
Material |
Thickness |
Copper |
Surface |
Color |
|
Single,2layer,4layer, 6layer,8layer, 10layer~24layer |
FR1 FR2 FR4 aluminum |
0.2mm,0.4mm, 0.6mm,0.8mm, 1.0mm,1.2mm, 1.6mm,1.8mm 2.0mm,3.0mm
|
1oz 2oz 3oz ~~ |
HASL lead free ENIG |
Green Black White Blue Red |
|
PCBA |
manufacturing technique |
Stencil |
Asistance |
Quality Checking |
Packing |
|
|
HASL lead free Red glue process |
Laser stencil Nano stencil |
Production fixtures |
AOI X-Ray |
Air bubble bag Customized |
order process
The following flowchart provides a detailed description of the operational steps for each of our orders, from receiving the customer's documents to the end of production and shipment. The manufacturing of circuit boards requires strict control over every production step, which is a critical point. The company needs to strictly control every step and its corresponding quality control process.
