Smart Bracelet PCBA OEM Manufacturing
We just focus to provide electronic manufacturing service for PCBA board and electronic products
Contact us-
OEM order for PCBA
Please provide us with the Gerber file (or the original PCB design file) along with the BOM list. With these, we can manufacture the PCB based on the Gerber data, source all components listed in the BOM, and complete the PCB assembly at our SMT facility.
-
OEM order for electronic products
For end-to-end manufacturing, we require the customer to send the 3D housing design file, PCB Gerber files, and a detailed BOM. Based on these, we will build the case mold from the 3D file, fabricate the printed circuit board from the Gerber data, order all necessary parts listed in the BOM, assemble the PCB using our SMT capabilities, and conduct final product assembly within our factory.
-
ODM order for PCBA board
If customers wish to modify an existing PCB, they must provide the original PCB file (e.g., .pcb). Our hardware engineers can then adjust the board’s dimensions, shape, and interface placements as requested. Additionally, to initiate a new PCBA design, customers should supply either the schematic file or a detailed description of functional requirements and logical architecture—enabling us to carry out the full design work.
-
ODM order for electronic products
If you’d like to overhaul the product’s form and structure, please provide all original documentation and source files. With this, our team can deliver a complete redesign—updating the industrial design, refining the mechanical layout, resizing the PCB, and adjusting interface locations accordingly.
For brand-new products inspired by novel ideas, we need clearly articulated functional requirements, logical workflows, and specific ID/aesthetic guidelines. Kindly note: conceptual sketches or high-level ideas without sufficient detail cannot support accurate engineering and design.
OEM for PCBA board
OEM includes PCB fabrication, components sources, and PCB assembly. The PCB board is made based on the gerber file and PCB parameter requirements provided by the customer. Material procurement is based on the provided BOM list, and surface mount production is determined based on the provided gerber file and BOM list through engineer analysis to meet production requirements.
ODM for PCBA board
In addition to standard OEM services, ODM PCBA incorporates design work—either developing a new board from the customer’s schematic or customizing an existing solution using provided samples and supporting documents according to the customer’s specifications.
OEM for electronic products
OEM electronic products are based on customized processing requirements for the structure and shell of PCBA boards. In addition to the provided PCB files, customers also need to provide 3D files of the shell and detailed requirements for the shell, such as surface treatment, silk screen files and requirements, shell material, and so on.
ODM for electronic products
Unlike standard OEM services, ODM involves end-to-end development of the entire electronic product—including custom PCB layout and structural shell design. As this is a challenging, lengthy, and costly undertaking, we require customers to provide a complete hardware design vision, precise software functional needs, and thorough specifications for the product’s enclosure.
PCB information:
FR4 material,2 layer,0.4mm thickness,1oz copper, ENIG ,blue solder mask and white silkscreen,
PCBA information:
front-sided SMD mounting, back side for soldering the wire,
BGA, QFNpackaged chips,
0201,0402 packaged resistor and capacitor
Lead free processing technology
PCB and PCBA related process parameter table
The following table contains some required parameters for PCB and PCBA production. When customers send PCB files, they need to inform us of the relevant PCB parameters. The table lists the basic parameter requirements, and each requirement corresponds to a different PCB cost.
PCB |
Layer |
Material |
Thickness |
Copper |
Surface |
Color |
|
Single,2layer,4layer, 6layer,8layer, 10layer~24layer |
FR1 FR2 FR4 aluminum |
0.2mm,0.4mm, 0.6mm,0.8mm, 1.0mm,1.2mm, 1.6mm,1.8mm 2.0mm,3.0mm
|
1oz 2oz 3oz ~~ |
HASL lead free ENIG |
Green Black White Blue Red |
|
PCBA |
manufacturing technique |
Stencil |
Asistance |
Quality Checking |
Packing |
|
|
HASL lead free Red glue process |
Laser stencil Nano stencil |
Production fixtures |
AOI X-Ray |
Air bubble bag Customized |
order process
Our end-to-end order execution—from initial receipt of customer documentation to final production and shipping—is clearly illustrated in the following flowchart. Given the precision required in PCB fabrication, every production phase must be tightly controlled, and we implement stringent quality control protocols at each step.
